|Material:||Natural Rubber:RSS3,imported From Thailand||Cord Fabric:||1880D2,100% Raw Silk|
|Warranty Period:||24 Months||Design Using Life:||10 Years|
marine salvage air lift bags,
boat recovery airbags,
Marine Buoyancy Bags
Used For Vessel Salvage Heavy Moving With Inflatable Rubber Airbag
Advantages of Florescence inflatable rubber airbag
1. Higher flexibility and damping capacity
2. Optimized structural layout
3. Durable aging resistance and anti-wear characteristic
Special attentions during the use of the airbag
* Control the working pressure strictly and it’s not allowed to exceed the working pressure.
* There shall be no sharp and protruding hard object on the contact surface with the airbag in case it punctures the skin of the airbag .
* Try to avoid distortion happened to the length direction of the airbag
* Empty charge test shall be performed if the air bag is not used for a long time or reused after repair. Charge pressure if the airbag shall be the same as the test pressure valve when delivered. Inspectors shall be at least 3 meters away from the air bag. For air bag recovered from large damage, its working pressure shall be reduced reasonably. Besides, annual check shall be conducted on air bag which are used often.
* Do not drag the air bag on the ground.
Working pressure of Florescence marine rubber airbag:
|Diameter||Layer||Work pressure||Diameter||Layer||Work pressure|
|D=0.8M||3||0.13 Mpa||D=1.5M||3||0.07 Mpa|
|4||0.17 Mpa||4||0.09 Mpa|
|5||0.21 Mpa||5||0.11 Mpa|
|6||0.25 Mpa||6||0.13 Mpa|
|7||0.30 Mpa||7||0.15 Mpa|
|8||0.33 Mpa||8||0.18 Mpa|
|D=1.0M||3||0.10 Mpa||D=1.8M||3||0.06 Mpa|
|4||0.13 Mpa||4||0.08 Mpa|
|5||0.17 Mpa||5||0.09 Mpa|
|6||0.20 Mpa||6||0.11 Mpa|
|7||0.25 Mpa||7||0.13 Mpa|
|8||0.28 Mpa||8||0.15 Mpa|
|D=1.2M||3||0.09 Mpa||D=2.0M||3||0.05 Mpa|
|4||0.11 Mpa||4||0.07 Mpa|
|5||0.14 Mpa||5||0.08 Mpa|
|6||0.17 Mpa||6||0.10 Mpa|
|7||0.20 Mpa||7||0.12 Mpa|
|8||0.23 Mpa||8||0.14 Mpa|
The structure of Florescence rubber airbag:
It consists of a bag body and an iron-end component. The bag body is manufactured by vulcanizing the preliminary shaped airbag made of base rubber and reinforced fiber material. The material of the iron- end component is metal, and it is connected to the bag body firmly.
Q1: What’s the material of your products?
A: Our raw material is natural rubber, and rubber-dipped nylon cord fabric
Q2: Are you factory or trading company?
A: Qingdao Florescence Marine Supply Co.,Ltd is the company and factory,located in Jimo City,Qingdao,near to Qingdao port and Qingdao airport,which is convenient for transportation.
Q3: What’s certificates can your company provide?
A: We can provide CCS,ABS,DNV,LR,BV certificates.
Q4: What about your warranty time?
A: Our warranty period is 24 months.During this time,any problems about products from our factory,we solemn promise to change and repair them for free;if problems from customers’ improper operating,we could provide free guidance and repair materials
Contact Person: Michelle Zhang
Tel: +86 053280689155