|Product Name:||Marine Rubber Airbag||Diameter:||0.6m-2.8m|
|Certificated:||CCS; BV; ISO, IRS, CCS, Etc.||Warranty:||2 Years Without Misuse|
|Application:||Ship Launching, Landing And Salvage|
Barge Ship Balloon,
Marine Barge Ship Balloon,
Rubber Marine Ship Launching Airbag
airbags were deployed in that project. One was 2 meters in diameter and 6 meters long and used for elevating.
The remaining six airbags were 0.8 meters x 6 meters long and acted as the rollers.The first intention of that trial launch was to develop a prompt, less landform limited ship launching method for warfare purposes.
Over the past twenty years, the airbag ship launching system has made advancements in not only the airbag,
but also the ship launching/landing technology.
The first generation airbags used a rubber dipped canvas as a reinforcement layer to form the air chamber trunk. Two cone-shaped molds were then used to make the ends and everything was stuck together.
With today’s airbags, the whole-enlacing-technology used for manufacturing is done together.
Rubber dipped synthetic-tyre-cords are used as the reinforcement layers with the trunk and two cone-shaped ends made at the same time.Everything is then-laced together, so the airbag doesn’t have any joints.
Due to the development of rubber chemistry, the performance of the rubber employed in the latest airbags is highly enhanced and about 15 times that of the first generation bag with the same specifications.
The launching and landing technology has also developed. In the beginning, only small and flat bottom ships located on a fabricated slope could be launched with airbags.
Now this technology is more flexible and less limited by the ship and landform. Now any type of ship with a DWT below 55,000 and in a place with enough launching space can be launched using airbags.
The launching slope even can be sloped upward. It has really developed into a cutting edge technology for launching ships, and especially useful for some marine emergencies.
1. For ship upgrading, conversion or new/repair launching (Ship launching airbags)
2. Marine airbag for salvaging sunken ship or heavy immersed steel structure
3. For hoisting and transporting heavy goods up to 10,000 tonnes structure on land
4. For floating use purpose as improve the draft.
5. Pneumatic rubber core for architecture engineering Container for storing and transporting gas and corrosive chemical liquid and pure water for voyage
Different airbag size stock available, quick delivery
●Provide repair kit and on site instruction
●Long time service life can be reused many times
●Wear resistance and anti aging
●Good raw material and cord fabric
●Do no harm to the environment. Time & money saving
●Need no more than air compressors, winches and ropes
●Marine airbags are much cheaper and portable than other methods
Contact Person: Michelle Zhang