|Name:||RS Approved Inflatable Pneumatic Marine Fenders For Port Dock||Size:||D2.0L3.5m|
|Initial Pressure:||50Kpa, 80Kpa||Certificate:||ISO, BV, CCS, RS, IRS, ABS, LR, Etc|
|Material:||Natural Rubber||Warranty:||2 Years|
|Service Life:||6-8 Years|
Inflatable Pneumatic Marine Fenders,
RS Approved Pneumatic Marine Fenders
RS Approved Inflatable Pneumatic Marine Fenders For Port Dock
Florescence floating fender for ship has the advantages of high energy absorption and reaction force, low cost, long service life, simple installation and maintenance, etc. It is usually used in ship to ship, ship to wharf for barge and docking, which is a new generation product of fender of ships and is popular in the world.
Due to its self-floating characteristics, this floating fender for ship to ship operation is also particularly suitable for installation in docks where the tide level varies greatly. Among them, the filled rubber fender is especially suitable for applications in harsh environments, such as offshore drilling platforms, due to its advantages of maintenance-free and long service life.
Pneumatic rubber fender types
1. Chain and tyre net type
Chain and tyre net type pneumatic fender systems are covered with a chain net, wire net or fiber net for small size fenders.
Usually these nets have used-tires together with rubber sleeves for additional protection, except fiber net which has only rubber sleeves. Chain nets last longer against corrosion, while wire nets are light and more easily repaired.
2. Sling type
Sling-type Pneumatic Fender Systems have an attachment eye on each end for lifting and installation. Handling of sling type fenders is easy due to their lightweight.
Structure of pneumatic rubber fender
1. Outer Rubber
Cover outside on the ball of rubber layer, which is used to protect skeleton material and inner rubber ball from damage of external force.
2. Synthetic cord reinforced rubber layer
Reinforced cord rubber layer is composed of winding synthetic cord layer, it is mainly used for maintain the internal air pressure.
3. Inner Rubber
On the ball inside the rubber layer, which is used to prevent air leakage and control the ball pressure.
4. End Flange
The metal parts at both ends of fender, which can be fitted with charging valve and safety valve
Factors on design and selection of pneumatic rubber fender
1.Maximum energy absorption
3.The distance requirements when two ships berth or one ship goes alongside wharf, including the maximum distance and the minimum distance
4. The size of vessels
5.The factors on storm from real environments and temperature changes.
|Product Name||LNG ship dock floating pneumatic marine fender|
|Application||STS, STD, STB|
|Certificate||ISO, BV, CCS, RS|
Advantages of pneumatic rubber fender
1.Our pneumatic fender as a protective medium is suitbale for ship to ship contact, ship to dock and ship to berthing.
2.It is light weight,portable and floatable, can be installed, replaced easily and reused 6-8years without misuse.
3.We have provided pneumatic fenders to marine service and offshore service for varieties ships.
4.Low reaction force and high energy absorption fenders with CCS,BV certificate.
Test of ship pneumatic fender
1. Material test for rubber
The material test of the outer rubber and the inner rubber shall be conducted in accordance with the physical properties of inner and outer rubber required by ISO 17357:2002
The dimension of all the fenders shall be inspected at the initial internal pressure and the results shall be within the following tolerances:
- length: +10%, -5%;
The air-leakage test shall be conducted on all the fenders at initial pressure for more than 30 min, and the test results shall
confirm that there is no air leakage.
The hydrostatic-pressure test shall be performed for 10 min at the hydrostatic-pressure shown in "test pressure at 0% deflection". Maximum temporary elongation: 10%
Application of pneumatic rubber fender
♦ Oil Tankers, Container Vessels
♦ Ship to Ship(STS), Ship to Wharf(STW)
♦ Luxury Yachts, Ocean Platforms
♦ Large Shipyards, Fender Systerm
♦ Military Ports, Warships
♦ Large underwater foundations of bridges, etc.
Maintenance of pneumatic rubber fender
1. Pneumatic pressure control in±5% of the rated pressure
2. Test pressure normally, add pressure in a timely manner
3. Avoid contact with sharp objects
4.When Long time not need, should wash to dry, filled with right amount of compressed air, placed in a cool dry ventilated place.
5.Storage place away from heat, acid and alkali, oil and grease
6.When store floating fender, shall not be folded and piled up
Use attention of pneumatic rubber fender
*Frequently check whether the fender body is damaged and whether the pressure is normal,and the valve core must be replaced every six moths
*The steel wire should wrap the rubber pipe,when trying steel wire to pneumatic rubber fender in case the fender is stabbed
*The surface or subject next to the pneumatic rubber fender can’t be hard and sharp-pointed in case the pneumatic rubber fender is stabbed
*The accessories and jigs nuts can’t be loose when testing the internal pressure
*The rope net should be reliable,the steel wire used for hanging metal parts and the hook link can’t be tied in disorder.
Packing and delivery
Qingdao Florescence Marine Supply Co.,Ltd is a comprehensive marine supply enterprise, intergrating the scientific research design, product development with technical services. We specialize in manufacturing pneumatic rubber fenders, foam fenders, various marine rubber fenders and ship launching & salvage rubber airbags.
FLORESCENCE products are designed, manufactured, and tested per ISO17357 and ISO9001:2002. And every unit is produced strictly according to the requirements of ship surveyors such as BV, CCS, etc.
Equipped with advanced manufacture, test and R&D equipments, FLORESCENCE becomes a Chinese leading marine supplier with the longest history, fastest development, most abundant capital & technology and the most competitive products.
Located in the Port of Qingdao FLORESCENCE can respond effectively to any urgent requirements of fenders and airbags with its comprehensive range of products.
Contact Person: Michelle Zhang
Tel: +86 053280689155