Marine Inflatable Floating Yokohama Pneumatic Rubber Fender With Chain Net

The Pneumatic Rubber Fender is an abrasion-resistant rubber fender filled with high pressure air. It can be easily deflated which allows simple and cost effective relocation and recommissioning in other locations.

Yokohama floating Marine boat pneumatic rubber fender was based on rubber technology for automotive tires and rubber aircraft fuel tanks. Our fenders are used in the various applications including ship-to-ship operations, ports and terminals and have proven its quality and performance.

Our Pneumatic Rubber Fenders are available in diameters ranging from 500mm to 4500mm and lengths ranging from 1000 mm to 9,000 mm.  And Their weights range from 25 kg to 2700kg.

How To Choose The Right Pneumatic Rubber Fender For Your Application

There are many service factors which must be taken into consideration when making a decision on which type and size of

Pneumatic Rubber Fender is best suited for a given application , type and size of vessel, berthing velocity of vessel method of berthing ,sea currents and wave action. Please contact us for the details of marine fenders.

Advantage:

◆Stronger against shearing force Relatively safe even during excess load
◆Advantages during crucial weather conditions Deterioration in performance minimised

◆Simple installation and low maintenance cost

◆Quickly identifiable with complete markings and radio frequency identification (RFID) tagging ◆Guaranteed reliability - consistent performance irrespective of age or extreme temperatures

◆ISO17357 standard guidelines ensure superior ◆High precision design engineering & advanced manufacturing processes
◆High-performance guarantee
◆24-hour emergency response support
◆Professional technical advice & engineering support
◆Reputable global marine third party inspection options available.

Our Service

1.One-to-one VIP service.

2.Lifelong after-sale service.

3.Professional suggestions for suitable dock bumper size and quantity.

4.Teach customers to use the dock bumper on site .

5.Any questions about dock bumpers will be replied within 24 hours.

Features of our pneumatic rubber fender

* Fully compliant with ISO 17357 standard ,manufacture with mould ,difference with traditional hand-make products .

* Diameters ranging from 300 mm to 4500 mm and length ranging from 500 mm to 12000 mm

* Standard colors black

* Constructed with an inner rubber layer,reinforcing cord layers and outer rubber layer

* Correctly evaluated for angular and durability performance

* Clearly marked with all relevant identification

* Complete with up- to -date certification

* Available in a variety of sizes

* Fitted safety valve for fenders of 2.5 m diameters upwards .

Tests of Pneumatic Fender

1. Material test for rubber

The material test of the outer rubber and the inner rubber shall be conducted in accordance with the physical properties of inner and outer rubber required by ISO 17357:2002

2.Dimensional inspection

The dimension of all the fenders shall be inspected at the initial internal pressure and the results shall be within the following tolerances:
- length: +10%, -5%;
-diameter: +10%,-5%

3.Air-leakage test

The air-leakage test shall be conducted on all the fenders at initial pressure for more than 30 min, and the test results shall confirm that there is no air leakage.

4.Hydrostatic-pressure test

The hydrostatic-pressure test shall be performed for 10 min at the hydrostatic-pressure shown in “test pressure at 0% deflection”. Maximum temporary elongation: 10%

Classification of Pneumatic Fender

1. Fender types:
1.Net-type fender: fenders which are covered by tire chain net, each end shall be linked together with one to two ring(s).
2.Sling-type fender: fenders which are designed to be used without a protection net.
2. Initial internal pressure:
1.Pneumatic fender 50 (initial internal pressure 50 KPa)
2.Pneumatic fender 80 (initial internal pressure 80 KPa)

Why Choose Florescence

Florescence is a trusted supplier for shipyard, quay, harbors in the global market. Our factory in Shandong Province has been established for over 20 years. FLORESCENCE Pneumatic Fenders are sent to lots of countries, including Indonesia, Singapore, America, Russia, etc. Pneumatic fenders are certificated by CCS, ISO, ABS, BV, etc. It can be manufactured in different kinds of sizes and types according to the customers' requirements.

1. Outer Rubber Layer
Rubber layer which covers the outside of the fender to protect the cord layers and the inner liner rubber from abrasion and other external forces.
2.Tyre-cord Layers
Tyre-cord layers are made of synthetic-tyre-cord fabric which maintains the internal air pressure of the fender.
3. Inner Rubber Layer
The inner rubber layers are used to keep the air inside, avoid air leakage, it's the key to fenders' airtightness.
4. Flange