|Name:||Pneumatic Rubber Fender||Application:||Ship To Ship& Ship To Dock|
Dia4.5m Pneumatic Rubber Fender,
Black Inflatable Pneumatic Rubber Fender
Inflatable Rubber Fender Pneumatic Rubber Fender Yokohama Pneumatic Rubber Fenders
Pneumatic floating rubber fenders can play an important role in ships’ safe berthing operation. Essentially there are two main types of floating pneumatic rubbers, defined as either low or high pressure fenders. Pneumatic rubber fenders are made of synthetic-cord-reinforced rubber sheets with compressed air inside at initial pressure of 50kPa (low pressure) or 80kPa (high pressure) to enable it to float on water and work as a shock absorber between two ships or between ship and a dock. Although manufactured using different techniques, both low and high pressure fenders work by the same principle.
Yokohama Pneumatic fenders are used in the various applications including ship-to-ship operations, ports and terminals and have proven its quality and performance. With the needs of LNG continuing to develop, fenders play ever-greater role for the safe operations. Yokohama fenders are designed to withstand the extreme environmental conditions and we are committed to contribute to the offshore industry by delivering the superior products.
Several 4.5x9.0 size fenders will be used in between the largest floating production facility in the world and LNG carrier during the side-by-side operation.
Why Choose our pneumatic rubber fenders?
1. Qingdao Florescence is the first one and professional manufacturer of pneumatic rubber fenders with more than 30 years of developing and production experience
2. Credible company to make pneumatic rubber fenders with optimized rubber material, enough sizes and enough layers
3. ISO certificated with a number of patents on products
4. Pneumatic rubber fenders have been inspected and approved by Third-Party like CCS, BV, SGS, V-Trust etc with excellent performance of high energy absorption and low force reaction and airtightness.
5. Satisfying and timely after-sale service: In case of any quality claims during the warranty period, we will carry out the Three Guarantees for repair, replacement and compensation of faulty pneumatic rubber fenders.
If the yokohama type pneumatic fenders 3.3m x 6.5m caters to your requirement, welcome to buy or wholesale with our factory. As one of the leading manufacturers and suppliers in China, we will offer you the most competitive price and the best service.
The purpose of the pneumatic rubber fender
1.Ship to ship berthing
Accompanied by a large ship, the risk of two ship berthing at sea is also increased, especially when the weather changes, accompanied by wind and waves.Adopt pneumatic fender as side of the buffer, not only make heavy berthing becomes easy, and improve the efficiency of the transportation operations. Pneumatic fender is mainly used for: Ice in the Antarctic ocean fishing ships, large oil tanker berthing.
2. Used for terminal dock protection
Of the ship is very large, the cause of berthing impact energy have multiplied.Inflatable rubber fender because of its high energy absorption and low reaction force features are widely used.
|1.Easy to install and maintain||1.Oil and gas tankers|
|2.Low reaction and hull pressure||2.Fast ferries and aluminium vessels|
|3.More suitable for small and large tidal ranges||3.LPG vessels, ocean platforms, large docks|
|3.More suitable for small and large tidal ranges||4.Harbors and wharf|
Net-type fenders are covered with a chain net, wire net or fiber net for fenders. Usually these nets have used-tires together with rubber sleeves for additional protection, except fiber net which has only rubber sleeves. Chain nets last longer against corrosion, while wire nets are light and more easily repaired.
Sling-type fenders have an attachment eye on each end for lifting and installation. Handling of sling type fenders is easy due to their lightweight.
Classification of pneumatic ship rubber fender:
1.Net-type fenders: fenders which are covered by a tire chain net, each end shall be linked together with one to two ring(s).
2.Sling-type fender: fenders which are designed to be used without a protection net.
Initial internal pressure:
1.Pneumatic fender 50 (initial internal pressure 50 KPa)
2.Pneumatic fender 80 (initial internal pressure 80 KPa)
Tests of Pneumatic Fender
1. Material test for rubber
The material test of the outer rubber and the inner rubber shall be conducted in accordance with the physical properties of inner and outer rubber required by ISO 17357:2002
The dimension of all the fenders shall be inspected at the initial internal pressure and the results shall be within the following tolerances:
- length: +10%, -5%;
The air-leakage test shall be conducted on all the fenders at initial pressure for more than 30 min, and the test results shall confirm that there is no air leakage.
The hydrostatic-pressure test shall be performed for 10 min at the hydrostatic-pressure shown in “test pressure at 0% deflection”. Maximum temporary elongation: 10%
Contact Person: Michelle Zhang
Tel: +86 053280689155